G104STN01.3 is a 10.4-inch LCD module product developed by AU Optronics Corporation (AUO) featuring a-Si TFT-LCD technology. It is equipped with WLED backlighting, including an LED driver for backlighting, and does not have a touch interface. The display resolution of G104STN 01.3 is 800 (RGB) × 600 (SVGA), with a 4:3 (width: height) aspect ratio and RGB vertical stripe pixel arrangement. The display area dimensions are 211.2 × 158.4 (width × height) mm, the visible area dimensions are 215.4 × 161.9 (width × height) mm, and the physical dimensions are 227.3 × 177.5 (width × height) × 9.3 (thickness) mm. The surface treatment is matte, with a hard coating (3H). The product weighs 294g (typical). The backlight for this product uses 6S3P WLED light sources with side-illumination (bottom), with a lifespan of 50K hours and an LED driver included. G104STN 01 .3 utilizes LVDS (1 channel, 6/8-bit) signal interface with a total of 20 pins and is connected via terminals. The driving voltage is 3.3V (typical). Its typical vertical refresh rate Fv is 60Hz. It operates within a temperature range of -30 to 80°C, stores at -30 to 80 °C, and is resistant to vibrations with a vibration tolerance of 1.5G (14.7 m/s²). Given its wide temperature tolerance, white LED backlight, lifespan exceeding 50,000 hours with an LED driver, 180-degree flip display, 6/8-bit gray scale options, and matte surface treatment, this model is recommended for industrial use.