The DJ070IA-20B is a 7.0-inch a-Si TFT-LCD LCD module product launched by Innolux. It features WLED backlighting, no backlight driver, and no touch functionality. The operating temperature range is -35 to 80°C, and the storage temperature range is -40 to 95°C. Its typical characteristics include wide temperature range, high brightness, white LED backlight, 180-degree flip display, matte surface finish, and Reflectance SCI: 4.5%. Based on its features, the screen library recommends this model for use in outdoor high-brightness and vehicle display products. The DJ070IA-20 B has a display resolution of 1280 (RGB) × 768 (WXGA), a aspect ratio of 15:9 (width: height), pixels arranged in RGB vertical strips, and a calculated pixel density of 213 PPI. The display area dimensions are 152.448 (width) × 91.4688 (height) mm, the physical dimensions are 163.35 (width) × 107.12 (height) × 13.6 (thickness) mm, the visible area dimensions are 155.45 (width) × 94.47 (height) mm, and the surface treatment is matte with anti-reflective coating. The product weighs 180 ± 18 grams net. In terms of backlighting, this product uses a side-illuminated WLED light source with 7S3P configuration. The light source’s lifespan is 10,000 hours, and it does not include a backlight driver. The DJ070 IA-20B employs LVDS (1 channel, 8-bit) + SPI signal interfaces, with a total of 40 pins and uses terminal connections. The driving voltage is 3.3V (typical). Its typical vertical refresh rate Fv is 60Hz.