The B133HAB01.0 is a 13.3-inch display module launched by AU Optronics Corporation (AUO), adopting the a-Si TFT-LCD technology. It is equipped with a WLED backlight integrated with an LED driver and features On-Cell Touch functionality.With a display resolution of 1920(RGB)×1080 (FHD) and an aspect ratio of 16:9, it adopts an RGB vertical stripe pixel arrangement. The active area measures 293.472×165.078 mm (width × height), while the outline dimensions are 317×208 mm (width × height) × 4.2 mm (thickness). The surface is treated with anti-glare (AS) and hard coating (7H), and the maximum net weight of the product is 400g.For the backlight system, this product uses edge-lit WLED light sources with a lifespan of 15,000 hours and incorporates an LED driver. The B133HAB01.0 HW0A adopts an eDP (2 Lanes) signal interface with a total of 40 pins, connected via terminals, and the typical driving voltage of the panel is 3.3V. Its typical vertical refresh rate (Fv) is 60Hz.The operating temperature range is 0 ~ 50°C, the storage temperature range is -20 ~ 60°C, and the vibration resistance is 1.5G (14.7 m/s²).Characterized by its built-in touch panel, white LED backlight with an integrated LED driver, flip-chip terminal design, and compatibility with Dell devices as well as compliance with eDP1.2 standard, this model is recommended for use in notebook computers.